Our Products for natural gas pot furnace flue gas carbon monoxide value

The Risks Behind Carbon Monoxide And Your Gas Furnace

Furnaces CO Emissions Under Normal and Compromised Vent Conditio…

Get A Quote

Performing a Combustion Analysis

If a gas furnace is burning clean and has a good supply of oxygen to the burner it could be that it's not producing CO to unsafe levels. Carbon monoxide is created when fuels such as natural gas or propane have incomplete combustion or don't burn completely. CO is colorless, odorless, tasteless and initially nonirritating, but it will cause

Get A Quote

1.4 Natural Gas Combustion - US EPA

The average gross heating value of natural gas is approximately 1,020 British thermal units per standard cubic foot (Btu/scf), usually varying from 950 to 1,050 Btu/scf. 1.4.2 Firing Practices 3-5

Get A Quote

Difference Between Carbon Monoxide and Natural Gas

Complete combustion of natural gas or propane produces carbon dioxide (CO2), water vapour (H2O) and heat. When fossil fuels such as natural gas or propane burn incompletely due to a lack of an adequate supply or mixing of oxygen to produce CO2, CO forms. Natural Gas complete combustion: CH4 + 2O2 = CO2 + 2H2O + Heat. Natural Gas incomplete

Get A Quote

Furnaces CO Emissions Under Normal and Compromised …

concentrations in the flue gas ranged from 6 ppm to 37 ppm, respectively. When the input rate was adjusted to 118,000 Btu/hr and 128,000 Btu/hr, the air-free CO concentrations in the flue gas ranged from 99 ppm to 1,686 ppm. The current ANSI Z21.47 standard (1998) has no …

Get A Quote

Flue gas - Wikipedia

Jan 02, 2006 · than 100 PPM in the flue. Be careful to take your reading 18" to 24" away from the furnace. Readings should be for O2 at 6 to 9%. Flue gas temperature should be around 130 degrees to 140 degrees and the plenum temp should be close to that reading …

Get A Quote

Guidelines for the Gas Service Industry: Carbon Monoxide

Furnaces CO Emissions Under Normal and Compromised Vent

Get A Quote

Carbon Monoxide Detection And The Effect On The Human Body

It has a very low heating value, about 93 BTU /cubic foot (3.5 MJ/m 3 ), because it consists of about 60 percent nitrogen and 18-20% carbon dioxide, which are not flammable. The rest is mostly carbon monoxide, which has a fairly low heating value already and some (2-4%) hydrogen.

Get A Quote

Related natural gas pot furnace flue gas carbon monoxide value Information